Canon Printer help to remove technical issues

Printer Troubleshooting Steps To Reset Ink Cartridge After Refill

Today here in this article we are going to discuss the Printer Troubleshooting Steps To Reset Ink Cartridge After Refill. There are many clients who search for the solution for resetting the ink cartridge after refill. So, the printer troubleshooting steps provided here would be helpful for all of them.

How to Reset Inkjet Cartridge?

As the ink cartridge can be refilled quickly, getting it to work again in the printer is another matter. The contacts on the backside of the cartridge are programmed to read the ink level, but they don’t reset for the printer just because you add more ink. You must get the printer to recognize the cartridge as new. So follow the printer troubleshooting steps mentioned below to reset my Inkjet cartridge, scroll down and get a solution for your problem.

Kindly insert the cartridge that you refilled in the printer, does the printer print an alignment page, thus recognizing the printer, after this, the printer will still read the ink level as where it was before you refilled.

Now detach the ink cartridge from the printer and replace it with another old cartridge, now see have the printer print an alignment page with this printer cartridge so as it recognizes it as a different cartridge from the first one.

Now you have to replace the second printer cartridge with the third one and run the same alignment page because the printer only retains the memory of two print cartridges, it will erase the memory of the first one.

Now again insert the refilled cartridge into the printer, the printer will not recognize the cartridge as being full.

Now you have to tape over the contact squares on the top left cartridge.

Insert the printer cartridge into the printer and run alignment page, if any message comes on the screen that there is a problem with the cartridge then ignores it.

  • Take the cartridge out of the printer
  • Politely remove the tape from the left corner and tape over the contact squares on the top right corner.
    Now place the printer cartridge back to its place and run another alignment page.
  • Now gently remove then reinsert the cartridge, remember this time no tape should be there on any of the contacts.
  • Now check that if the printer recognizes the cartridge as being full.
  • Repeat the above printer troubleshooting steps if the cartridge is still showing as being empty.
  • This time, use the bottom corner contact squares instead of the top ones. If you are still unable to reset the cartridges, using multiple cartridges is likely the only way to do it.

After trying all these printer troubleshooting steps, I hope that it would help you but still, if you are facing any problem, then you may ask for some help from printer support as they will provide you a proper guidance about how to reset my Inkjet cartridge.

printer catridge

Why After Changing a Cartridge Will the Printer Not Print?

Evacuate Protective Tape

Most ink cartridges transport with a little portion of defensive tape covering the print spout. This tape hinders the spout to keep ink from spilling out during stockpiling or delivery. On the off chance that you don’t evacuate the tape, the cartridge won’t have the option to print. Expel the cartridge from the printer and search for the tape. Its shading may differ contingent upon the model of the cartridge. Printer Troubleshooting Steps To Reset Ink Cartridge After Refill try not to expel some other stickers or names on the cartridge. These seal the cartridge so the ink doesn’t dry out. In the event that you expel the mark, the ink can dry out quickly.

Reset Ink Cartridge Counter

Your printer may not perceive the new ink cartridge, or the ink counter may peruse it as unfilled. Numerous printers have a cartridge reset highlight that powers the machine to perceive the cartridge as new. For instance, to reset the cartridge in some Epson Stylus models, press and hold the “Cleaning” button or the “Heap/Eject” button for three seconds. Lift the clip making sure about the cartridge, yet don’t expel the cartridge from the printer. Close the clip and press “Burden/Eject” once more. Counsel your printer’s client manual to get familiar with the reset procedure for your printer.

Run Extended Cleaning Cycle

In the event that your ink cartridge sat away for any period of time, the ink may have begun to dry out. Running an all-encompassing cleaning cycle may address the issue and help the printer perceive the cartridge. Check your printer for a “Cleaning” catch and press it or hold it down for a couple of moments. Peruse the printer’s manual to discover how to run a cleaning cycle on your machine. Subsequent to running the cleaning cycle, print a test page to decide if the printer can print once more.

printer catridge

Topped off Cartridge Problems

Topping off ink cartridges will set aside you cash, yet topped off cartridges have their own arrangement of potential issues. In the event that you filled the cartridge inappropriately, the printer may not print. At the point when you fill a cartridge, the ink here and there doesn’t make it right to the base of the store. Fix this issue by evacuating the cartridge and infusing more ink into the wipe through the leave gap. Air bubbles likewise can get caught inside the cartridge, blocking ink stream. Permit the cartridge to sit unused for about an hour to allow the air pocket to oust without anyone else. In the event that the difficult continues, expel the cartridge and tenderly tap it on a table to oust the air pocket.

How to Reset Ink Levels on a Cartridge?

Sometimes it happens while using the printer the ink indicator cartridge shows a sign of low level although there is plenty of ink in the cartridge for this you should ask for help from the printer service squad. This type of printer error generally occurs when the cartridges are refilled. Most printers store the serial number of cartridges in the printer’s internal memory. When the same printer cartridge is refilled, the printer does not recognize it as a refilled printer cartridge. So to get rid of these types of problems we are here to tell you how to reset my Inkjet cartridge. Fortunately, there is a simple solution to these printer problems.

Step 1: Take out both black and color ink cartridge from the printer.

Step 2: Now press the ON button of the printer and keep it on for 20 seconds, then turn it off, please allow the printer to turn “OFF” completely. Repeat this step at least five to six times so that the printer cartridge identification will be erased from the printer’s memory. Printers usually store the identification information of the last five ink cartridges that were used.

Step 3: Now replace the black and color printer cartridges inside the printer, now print a test page to ensure the cartridge level system is reset, and the machine is printing correctly.

There are many ways to reset the device, called a soft reset, which will help in resolving malfunctions having to do with printer cartridges and paper. So guys, please let us know about your experience did you get proper guidance from the Printer Troubleshooting Steps To Reset Ink Cartridge After Refill and if you are satisfied with our article then do share our content with your loved ones or near and dear ones so that they can also get an idea about how to reset my Inkjet cartridge and if in any case, you fail in the task then you can ask for help from the printer service team.

Leave a Reply

Your email address will not be published. Required fields are marked *